How to Make Rear View Backup Camera Always Be On?
04.14.2022 | VECLESUS® Rear View Safety | Rear view safety industry news

So, the simple answer is: Yes, backup cameras can constantly stay on, if you wire them correctly. Following are 3 popular wiring methods, to have an ‘Always On’ backup camera system:

1. Constant Power Supply

You can associate the camera to a consistent force source, and just have it generally on. The cigarette lighter attachment, is the most advantageous method of doing this. You could likewise get the force directly from the circuit box, in spite of the fact that you should know precisely the thing you are doing.

One benefit of having your reinforcement camera framework consistently on along these lines, is that you can utilize it as a security framework, if your screen has a video recording capacity. The hindrance is that your vehicle's battery could get depleted, when you don't utilize the vehicle for some time.

2. Connected to Ignition

It is likewise conceivable to interface the rear view camera or camera framework to the vehicle's start. Utilizing this technique, the camera will just come on after the motor has been begun.

This strategy shields the vehicle's battery from being depleted, and is likewise a mainstream 'Consistently On' camera technique, utilized in business conveyance vans and trucks.

The association doesn't need to be straightforwardly at the start. Essentially associating with any gadget or link, which is constrained by the start framework, is adequate.

3. Manual Switching

The third method is the use of a button to switch on the camera at will. This means that the system will be directly connected to a power source like in method #1, but the cables will then be run through a switch.

When connected this way, the system can be switched on, either with a running or a stopped engine. One advantage of wiring the camera this way, is that you have absolute control over it.

The disadvantage though, is the risk of battery drain, whenever you park the vehicle and forget to switch of the camera system.


When you decide to install an ‘Always On’ backup camera system, there are certain issues to consider, so that you can avoid unforeseen problems. These include:

  • Fused Power Sources: Cigarette lighter sockets are usually fused. This means that your devices will be safe in the event of a power surge. If you decide to connect directly, then make sure that the power supply is fused. If you fail to use a fused power source, then you risk damaging your backup camera system.
  • Adverse Weather: Adverse weather conditions are a certainty. When installing an ‘Always On’ system, you are best advised to use a reliable camera, which is proven to withstand extreme weather conditions. This way, nothing will stop your camera from staying on.
  • Battery Drain: This one is a little tricky. If your rear view camera system stays on after you have killed the engine and parked the car, it will continue to use energy from the battery. It’s hard to say how long it will take before a vehicle’s battery will be completely drained, but it’s safer to not leave the car unattended for more 2 days.

Our System Can Handle It!

Our backup camera systems undergo many rigorous tests before leaving the factory. This makes them ideal for tough-jobs like this. All of the possible conditions that could lead to a faulty backup camera system, have been tested and passed, allowing you to install our products with full confidence.